Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   A Superior...

Small-Frame     7075 T6 Aluminum     Anodized While we introduced the original aluminum bolt carrier over a decade ago, we finally discontinued it after several customers had difficulties...

    This coupler is designed by shooters for shooters and joins 30 round 1st and 2nd Generation .223 PMags by removing their base plate and inserting the magazines into our coupler. This coupler is made from high...

This coupler is designed by shooters for shooters and joins 3rd Generation .223 PMags and adds 4-5 rounds per magazine by removing their base plate and inserting the magazine into our coupler. This coupler is made from high...

XDM 9/40 ESP magwells are CNC machined from aluminum and anodized for durablity. This magwell was specifically designed to fit the IDPA box. The ESP magwell has enough room for an easy fast reload but ergonomically designed...

Production Division Legal   M&P 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They are perfect for...

Production Division Legal   Glock 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They also allow you to...

Production Division Legal   XDM 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They also allow you to use...

Springer Precision XDM 9/40 140mm extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. Comes with a 12 coil spring for reliable operation. This lengthens the magazine and add...

Everything you need to double-up on 8Q     mounting hardware for extra stability, including: Additional Short Coupling Bar (Mod_CB-s) Two additional standard-length (1/2") 18-8 Stainless steel 10-32...

Everything you need to double-up on 12Q     mounting hardware for extra stability, including: Additional Extra-long Coupling Bar (Mod_CB-xl) Three additional standard-length (1/2") 18-8 Stainless steel 10-32...

The Invictus Practical AARM/S 12Q is a twelve-round shotshell caddy system, equally suited to both the Quad-Load and Load-Two techniques, which groups three Quad Shell Plates to one Tek-Lok, TMMS, ELS or MLS (sold...

The Invictus Practical AARM/S 8Q is an eight-round shotshell caddy system, equally suited to both the Quad-Load and Load-Two techniques, which groups two Quad Shell Plates to one Tek-Lok, TMMS, ELS or MLS (sold separately)...

The Invictus Practical AARM/S 2-Point 8ight is a unique eight-round shotshell caddy system based on the incredibly compact "8ight Plate" - equally suited to both the Quad-Load and Load-Two techniques - which attaches to an...

Custom Refinishing by Hillbilly223 Urban Finishes Hover over the image thumbnail for the name of the pattern   Single Multi Color...

Designed for the AR15 Rifle or Carbine Buffer tubes, our UL Recoil System works with standard weight or Light Weight STEEL* carriers and adjustable gas blocks**. Drop in assembly, replaces your current buffer.....no...

Designed for the AR15 Rifle or Carbine Buffer tubes, our UL Recoil System works with standard weight or Light Weight STEEL* carriers and adjustable gas blocks**. Drop in assembly, replaces your current buffer.....no...

Available in a kit with Extention Tube & Spring here: ...

This nut fits our extension tubes and is designed to fit your shotgun. Each nut is made of machined billet aluminum and styled to match the shotgun brand. Anodized matte black. These fit ONLY Nordic Components Extension...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state. Full Capacity...

Reduced power recoil spring for light loads

Wolff Reduced Power Recoil Spring

Low-friction Delrin disk fits on the end of the buffer spring, opposite the buffer, and stops the annoying "twang" of the buffer hitting the rear of the receiver extension during recoil.

TTI Small Firepower Base Pad for Glock This new base pad is designed to give you the edge over the competition. Patented proven push pin design Super easy to attach and detach from the magazine No...

Extra-Power Spring Included   Patented, proven push-pin design Super easy to attach and detach from the magazine No specialty tools or devices required to disassemble One piece design, no extra...

Extra-Power Spring Included   Patented, proven push-pin design Super easy to attach and detach from the magazine No specialty tools or devices required to disassemble One piece design, no extra...

The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity. This Patented push pin design is indestructible and will not come off until you...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   State...

The TSG-22² quickly and easily converts any generation of the Glock models 17, 22, 34, and 35 into a .22LR pistol. Machined from a solid piece of heat treated 4140 steel, the TSG-22² maintains a similar weight and...

These magazine are a work of art. Boasting precision machined aluminum and the smoothest magazines change around, you’ll see why people are raving! Tactical Solutions 2211 10-Round Single Stack Aluminum Magazine...

Precision machined from 4140 steel with a black oxide finish giving it the look and feel of a traditional 1911 pistol. It is designed to easily fit on Government and Commander length frames without gunsmithing. The 2211...

HIGH PERFORMANCE RECOIL SPRING The last piece of the puzzle for proven reliabilty, trigger reset, cycling and getting your bolt back into battery. Our spring will last over thousands of cycles of repeated firings with out...

Our QUALOAD holds the 2 columns of shells next to one another, you can't get any closer than having them touch. No other quad load device can do this!! This allows for you to control how the shells come out of the holder and...

QUICK CADDY......light, easy, simple! Can you imagine this? We are actually calling this a traditional shell holder; the 3 gun sport has come a long way!! Made from Delrin, our Quick Caddy holds the shot shell by the rim...

Here it is!!! A new extension for the hottest new magazine on the market today!! The TACCOM +5 extension for the MAGPUL 40 round Gen III magazine. Designed to use the factory spring and locking plate, you simply remove the...

Does your 22LR insert fit tight into your upper? Does it move back and forth? Did you know that the very top of your lower receiver takes all the recoil of your 22LR insert? You can eliminate all those problems by inserting...

Finally, the final piece of the puzzle to having a reliable Ceiner/CMMG 22RF upper has been found!!! Taking our experience in 22RF design, we've come up with a firing pin that will ignite your 22RF rounds, whether you use a...

The TACCOM Extreme Extracor is a drop in part for your Ceiner/CMMG 22LR insert that will give you the reliability of consistant extraction during live fire. Up untill now, your rounds have been coming out of the ejetion port...

The 8up DUALOAD, the increase of our most popular.....is now drilled for both the TEKLOK and ELS 34 Hook.Adjustable for both left or right hand shooters, the angle can be tipped up 45 degrees for an easy and ergonomic...

The 4up DUALOAD, our most popular.....is now drilled for both the TEKLOK and ELS 34 Hook.Adjustable for both left or right hand shooters, the angle can be tipped up 30 degrees for an easy and ergonomic grab.Comes with longer...

Here it is.....a sub pound barrel for your AR15 22LR conversion. Coming in at about 14 ounces, we feel that it is quite possibly the lightest 17" barrel that is availible for your conversion. This is a composite barrel...

The NEW 16”TACCOM M4 contour barrel is machined from chrome-moly vanadium steel, manganese phosphate finished and comes with a Velocity Firearms Nickel Plated barrel collar. The Mil Spec ½-28 threads on the...

The backer is made from 3/16" black delrin and is tough.....strong enough to take on anything you can throw at it in the 3 gun game. A very simple and innovative design!! This single piece Backer allows you to attach 2...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   STI does...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) 9MM Mags are new style from STI   please...

The STI 2011 grip is half of the patented 2011 modular system. Made of durable glass filled polymer, the 2011 grip features metal inserts molded directly into the body of the grip to provide metal on metal contact points,...

Mag Spacer w/Follower for STI 2011 9mm Magazines.Spacer is 170mm & can be trimmed for shorter magazines.Used to convert 38 super Mags to 9mm. Black

The Samson Evolution Series is the next step forward in free floating hand guards. Light weight and durable these offer the perfect upgrade for 3 gun shooters, LE/Military or weekend enthusiasts alike. The 1.8”...

The SP ATC (Advanced Tactical Compensator) was engineered using CFD analysis software to design the best compensator available. SP’s unique side port design minimizes recoil as well as muzzle rise. Instead of allowing...