Rifle Accessories

Replacement Magazine Spring - as well as all factory 25 & 26 round magazines.

Replacement Firing Pin Spring for JP 9mm Bolt (JPBC-9MMA) This firing pin spring is compatible only with the JP 9mm Bolt and firing pin and should not be used with any other bolt assembly.

Molded polymer cover fits in the underside of a disassembled AR-15 .22 conversion upper receiver to prevent the bolt from falling out and keep dirt and debris out of internal components. Can be installed on any standard...

Buffer Pad ONLY

Glock Factory 9mm Magazine Follower

Rifle Spacer ONLY

High-density synthetic rubber wedge drops into the space behind the takedown pin in the lower receiver to provide tension between the receiver halves and prevent movement for improved accuracy...

Low-friction Delrin disk fits on the end of the buffer spring, opposite the buffer, and stops the annoying "twang" of the buffer hitting the rear of the receiver extension during recoil.

Does your 22LR insert fit tight into your upper? Does it move back and forth? Did you know that the very top of your lower receiver takes all the recoil of your 22LR insert? You can eliminate all those problems by inserting...

HIGH PERFORMANCE RECOIL SPRING The last piece of the puzzle for proven reliabilty, trigger reset, cycling and getting your bolt back into battery. Our spring will last over thousands of cycles of repeated firings with out...

  TTI Magazine Spring for Glock 140mm Magazines w/Large +5/+6 Base pad  Designed exclusively to work with the TTI base pads. Each coil compresses and stacks into the neighboring coil to provide the highest...

This easy to install, inexpensive, drop in upgrade is perfect for any AR rifle.  CNC machined from a solid piece of 6061-T6 aluminum, the Billet Mag Release Button is larger and easier to manipulate than the Mil-Spec...

Highest quality available. For use with DP basepads. Extra length can be trimmed for shorter mags.

Glock Factory Mag Spring for use in extended 19-23 round magazines

Complete shim kit allows you to properly index your muzzle device to your barrel. The kit comes with seven different thicknesses of stainless steel shims. The shims can be used alone or in different combinations to give...

Magpul Original Equipment Stock Tigger Guard

Pistol caliber carbines such as 9mm, .40 S&W, .45 ACP, and 10mm are a blast to shoot but can be tough on AR-15's internal components. Without a properly tuned blowback system, you run the risk of being overly destructive...

Simple, reliable tool quickly and easily removes a stuck case from the chamber.

Mil-Spec Barrel Nut

The TACCOM Extreme Extracor is a drop in part for your Ceiner/CMMG 22LR insert that will give you the reliability of consistant extraction during live fire. Up untill now, your rounds have been coming out of the ejetion port...

Hexmag vinyl Grip Tape available in Black or Gray. It is waterproof and easily applies to curved surfaces. This Grip Tape can be used with any product but is specifically made to fit within the Hex pattern on our HX30-AR...

  Quick detach sling swivel for mounting to Nordic Components mounting plates or other QD mounts. Release button flush to top of swivel body to minimize unintentional release Pull-tested to over 300...

Glock Factory Mag Spring for use in extended 31-33 round magazines

Wolff Mag Spring for use in TF 41+1 Glock Mag Extension Kit

Wolff Mag Spring for use in TF +10 Colt Mag Extension Kit

23 or 36 coil option 17-2 stainless steel Extra power for the 33 round Glock Magazine Extra power for +10 extensions Will also work on CZ Scorpion...

ALWAYS HAVE A SPARE •EASY TO REPLACE Basepad Service Kit For all Dawson Precision Basepads   5 Pack Basepad Springs, 5 Pack Basepad Detents

JP Enterprises trigger spring kit will give your stock AR-15 a 4 to 4-1/2 lb trigger pull; with JP trigger parts the same springs will produce a 3 to 3-1/2 lb trigger pull. This trigger spring kit will significantly improve...

Field stripping your AR15 will never be easier when using these extended take down pins. No more looking around for a tool, or using the nose of a round. Simply grab the extended head and pull the takedown pin out. The...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   A Superior...

Finally, the final piece of the puzzle to having a reliable Ceiner/CMMG 22RF upper has been found!!! Taking our experience in 22RF design, we've come up with a firing pin that will ignite your 22RF rounds, whether you use a...

Make Ready Chamber Flag by Plug'r

MBX Custom Springs for Glock Style MBX Extensions Custom wound Wolff premium spring for glock style follower and MBX follower. Produces maximum reliability and feeding when used in conjunction with MBX extensions...

We take a mil spec extractor, and polish the leading surface so that you are assured smooth function. We’ve found that this single operation is an important process to help with feeding the round into the chamber while...

The AP Mag ID Kit for pistol includes 6 base pad ID’s, numbered 1 through 6, that are laser cut from premium grip tape to fit the most popular magazines and base pads. The Pistol ID’s come in either red, blue,...

Here it is!!! A new extension for the hottest new magazine on the market today!! The TACCOM +5 extension for the MAGPUL 40 round Gen III magazine. Designed to use the factory spring and locking plate, you simply remove the...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   The...

Replacement Firing Pin for JP 9mm Bolt (JPBC-9MMA) This firing pin is compatible only with the JP 9mm Bolt and should not be used with any other bolt assembly.

An extra firing pin is a perfect addition for your range bag. If you are a recreational shooter, or a competitor in USPSA PCC Class shoots don't let your range day or competition end early. We rarely have firing pins break...

What no one has done before is address the force of the bolt and buffer slamming into the barrel on the return stroke. Now, we have! The stainless cushion will now actually soften that impact...

This firing pin is hands down, going to be your best chance as a “non-breakable” firing pin. We chose to use 17-4 stainless steel because it’s stronger and tougher than s7 tools steel; which is the common...

Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for...

Please do not attempt to purchase large capacity magazines if you reside in a location where you may not legally posses them (Ca, Co, Ct, DC, Hi, Il, Md, Ma, NJ, NY, OH) please check laws for your state.   The PMAG 30...

This spacer allows a Carbine or 9mm buffer or Silent Captured Spring to fit and function in a rifle-length buffer tube.

The AP Mag ID Kit for pistol includes 6 base pad ID’s, numbered 1 through 6, that are laser cut from premium grip tape to fit the most popular magazines and base pads. The Pistol ID’s come in eitherred, blue,...

Std. Rifle Length Gas Tube Length - 15 1/8Std. Mid Length Gas Tube Length - 11 3/4Std. Carbine Length Gas Tube Length - 9 3/4

Tool steel Hammer and Trigger Pins work to remove the slop between the trigger, hammer and the receiver. Pins feature Allen heads for easy tightening and are finished in black oxide. Trigger and hammer may have to be reamed...