Products

Other


Online Payments

Authorize.Net Merchant - Click to Verify





Home > Magazines / Loaders / Mag Accessories > Shotgun Caddies & Magazines
Sort By:
Page of 3
Taccom Backer
Our Price: $10.00

The backer is made from 3/16" black delrin and is tough.....strong enough to take on anything you can throw at it in the 3 gun game. A very simple and innovative design!!

This single piece Backer allows you to attach 2 QUALOADS to a Tekloc or ELS hook. Rotatable up to 45 degrees, The Backer will also allow you put the QUALOADs horizontal on the Tekloc system.

This now makes for the smallest foot print available to put multiple holders on your belt and not take up too much real estate.

You can also remove the QUALOADs from your belt and attach them to our 2" nylon web belt so that you can wear them on your chest. VERY ROBUST!!!
Blade-Tech Tek-Lok
Our Price: $11.00

Blade-Tech’s Tek-Lok™; a secure, innovative and versatile latching attachment system. The engineers and product developers at Blade-Tech took the original Tek-Lok™ and reworked its functional ability to add more utility and ease of use. The Tek-Lok™ has also been contoured to better fit the profile of the body and to eliminate hot spots. The new Tek-Lok™ is held in place by two robust retaining tabs. A user friendly, integrated secondary locking system was also built into the newly redesigned Tek-Lok™. With the simple motion of a thumb or finger, the redundant lock rotates out of the way to allow the user to pinch the retaining tabs and conveniently remove the Tek-Lok from the belt. It is readily adjustable to accommodate belts from 2.25” down to 1.25”.
Hardware included in this set are as follows; (3) 3/16” posts, (3) ¼” screws and (2) 1/8” spacers.
AP Customs Spring Replacement Kit for all AP Customs Shotgun Caddies
Our Price: $14.00

The AP Custom USA spring kit comes with everything you need to make emergency repairs while at the match or in the field.

The kit Includes:

(10) 303 Hi-Yield Springs
(10) 4-40x3/16 button-head cap screw
(10) #4 lock washers
(1) 3/32 short hex wrench

Taccom Duaload 4 Up Shell Holder - 12ga.
Our Price: $17.00

The 4up DUALOAD, our most popular.....is now drilled for both the TEKLOK and ELS 34 Hook.
Adjustable for both left or right hand shooters, the angle can be tipped up 30 degrees for an easy and ergonomic grab.

Comes with longer screws for TEKLOK's and Nut's for the ELS 34 hook
California Competition Works Shell Caddy-6 rnd
Our Price: $25.00

The California Competition Works Shell Caddy Tactical Shotshell Ammunition Carrier is made of glass-filled nylon.
Taccom Quick Caddy - 12ga.
Our Price: $26.00

QUICK CADDY......light, easy, simple!

Can you imagine this? We are actually calling this a traditional shell holder; the 3 gun sport has come a long way!!
Made from Delrin, our Quick Caddy holds the shot shell by the rim only allowing for easy access to the shells for simple and fast removal. Holds (4) - 12 gauge shells, any length!! 2 3/4", 3" or 3 1/2"!!

Comes with a belt strap to attach to your belt, but allows you to use the TEKLOK or ELS systems and is adaptable to MOLLE system as well.
Belt strap attaches with 2 screws and can be put on the left or right side of your belt so that right handed or left handed shooters can grab shells with either the weak or strong hand.

One of the most robust and very inexpensive shot shell holding systems out on the market today!!
AP Customs Load 2 System Shell Caddy - L2
Our Price: $27.00

The L2 is a 2-round 12 ga. shell carrier and comes equipped with a MOLLE tab for attaching to a MOLLE vest, chest rig, or nylon web belt, allowing the end user to configure his or her own custom modular loading system.

Like all AP Custom shell carriers, the L2s are CNC machined from solid billet aluminum. These carriers are designed to retain 12 ga. shotshells of any length and use our proven 303 Hi-Yield springs to withstand the most rigorous use.
Taccom Duaload 8 Up Shell Holder - 12ga.
Our Price: $35.00

The 8up DUALOAD, the increase of our most popular.....is now drilled for both the TEKLOK and ELS 34 Hook.
Adjustable for both left or right hand shooters, the angle can be tipped up 45 degrees for an easy and ergonomic grab
Taccom Quaload 4 Up Shell Holder - 12ga.
Our Price: $39.00

Our QUALOAD holds the 2 columns of shells next to one another, you can't get any closer than having them touch. No other quad load device can do this!! This allows for you to control how the shells come out of the holder and not have to worry about rim overlay.....the rims are already overlapped in the correct position!!

The top clip is adjustable for the length of shells that you use.

We allow a generous amount of room under the shells so that you can wrap your fingers arounds the shells before you lift them out of the holder. Also, we have the farthest distance between our clips so that HUGE hands will have no problem getting at the shells out of our loader.

Made from Delrin, the legs of the clips can be adjusted for tension (included in the instructions)

Holds (4) - 12 gauge shells 2 1/2, 2 3/4" or 3"

Comes with a belt strap to attach to your belt, but allows you to use the TEKLOK or ELS systems and is adaptable to MOLLE system as well.
Belt strap attaches with 2 screws and can be put on the left or right side of your belt so that right handed or left handed shooters can grab shells with either the weak or strong hand.
Taccom Duelin' Deuces 8rnd Shell Holder - 12ga.
Our Price: $39.00

JUST SAY NO TO PULLING SHELLS STRAIGHT OUT FROM YOUR BELT!!!

Not only did we slam these shells close together, we used our proven clip design from our QUALOAD's and tilted them so that you can grab and pull shells out at an angle to you body.....so that you don't have to rock out elbows, contort you hips or hinder your movement.

What does this all mean? You will be able to grab 2 or 4 shells ergonomically correct while on the move and not have to worry about that grab...or the pull....you will have more force available to snap the shells out and be more comfortable pulling those shells out. The more comfortable that you are at loading....the more confident you are at shooting a stage.

We allow a generous amount of room under the shells so that you can wrap your fingers arounds the shells before you lift them out of the holder. Also, we have the farthest distance between our clips so that HUGE hands will have no problem getting at the shells out of our loader.

You can use these holders for 2up or 4up loading (or both!!) depending on your style of shooting.


Holds (8) - 12 gauge shells

Designed to work with either the TECLOK or ELS systems